1 In 2 Out VGA Video Stereo Audio Balun Extender Splitter
Now you can easily extend a computer VGA video signal and stereo
sound to two projectors or two LCD monitors at two different remote locations through the
flexible and inexpensive Ethernet Cat5/Cat6 cables. This VGA extender kit allows long distance transmission of
video and stereo audio signals over the standard Cat5 / Cat5e / Cat6 UTP cables while
maintaining the same crisp and clear audio/video as the original input, eliminating the need to run
bulky shielded VGA cables and audio cables and providing high quality video extension while concealing the cable
with ease for a
cleaner and more professional installation.
This kit support supreme high VGA resolution up to
1900x1200 pixels. Very ideal
for digital signage applications in classroom, hospitals, airports, restaurants,
hotels, conference rooms as well as in secure military and commercial setup.
This VGA video/audio balun kit includes one transmitter and two remote
you to run out-of-the-way connections from one VGA video source to two remote VGA
monitors with sound. The local transmitter connects to a computer or other VGA source
with two remote receiver units to be connected with any two VGA displays such
flat panel monitors, projectors, LCD TV or other combination.
transmitter and receiver units will be linked using standard Cat5e or
Cat6 cable for transmission between the the source device and the
the VGA transmitter and receiver units use 12V DC adapters with secure lock connectors
to ensure the power adapters tightly connected to the units without accident
event of power loss.
Cost Efficient Cable Solution With Maximum
cable offers a low-cost solution based on the broad availability of networking
cable which is far more popular and flexible than VGA cables, not to mention the
facts that Cat5/Cat6 UTP cables are much less expensive and users can easily
customize the cable length needed at will.
The total signal transmission distance can be up to 300m (950ft) maximum depending on the resolution and
refresh rate of the PC's VGA graphics and the type of UTP cable used.
Adjustable Signal Gain And Equalization
Its receiver unit of this VGA balun extender kit has knobs
for adjustable gain and peak control to ensure that the full resolution of the
computer video output be retained the same at the remote end display with
minimum distortion and noise, full brightness and contrast.
The gain control is used
for adjusting the brightness level to to
adapt for the different length of UTP cable
control is for skew adjustment. The skew level in CAT5 cables is negligible for
distances less than 150 meters(450ft). However skew become significantly
important when using CAT5/CAT6 cables over distance longer than 150m(450ft).
Splitter For VGA Video Stereo Audio
This VGA balun CAT5 extender kit combines
2 functions together, video extension and splitter function for both VGA video
and stereo signals.
transmitter unit will distribute and amplify the single VGA input and the stereo
audio input from the source into two identical video/audio outputs to be
transmitted for its two paired receiver units at remote locations for
simultaneous presentations, greatly saving the cost of deploying an extra VGA
splitter and audio splitter for the whole setup. Nice and neat setup is also a
must for all professional installers.
VGA Loop-Through For Local
This video extender kit consists of a local video pass-through so users can
connects the computer VGA source to a local VGA display for monitoring purpose
and also supplies video and audio at the same time to the flat panel displays at
remote locations through the two VGA balun receiver units.
When your business grows, the VGA extender grows with you for more visual
displays and broadcasts. You can easily expand the display pools by daisy
chaining more of these VGA baluns or adding the
VGA splitter/distribution amplifier into the existing setup, allowing you to send the same content to
more screens at new locations.
- Nice Balun solution for sending computer VGA
signals over Ethernet cables.
- Great splitter solution for sending the
computer video and stereo audio to two remote locations for simultaneous
- Extends the compute video and audio signals through
using the low-cost CAT5/CAT6 UTP cable.
- Easy expansion with scalable capability.
Users can easily expand the display pools by daisy chaining more of these
VGA baluns or adding the
VGA splitter/distribution amplifier into the existing setup so to send the same content to
more screens at new locations.
- Maximum signal transmission distance up to 300m
(950ft) maximum depending on the resolution and refresh rate of the
computer graphic card setting and the type of UTP cable used.
- Built-in VGA splitter function with stereo
audio by distributing
the single computer video and audio input for dual displays at different remote
- Supports VGA loop-through for displaying
the video simultaneously
on both local and remote VGA monitors or projectors or combination of both.
- Adjustable signal gain and equalization
control to ensure that the full resolution of
the computer video output be retained the same at the remote end display
with minimum distortion and noise, full brightness and contrast.
- Supports supreme high VGA resolutions up to WUXGA
- Ideal for Pro A/V installers and integrators
looking for an easy solution to extend VGA video using Cat5 cabling.
- Fully plug and play. Easy to install and small
VGA Female, S-sub HD 15-Pin x 1
- RJ-45 x 1
for CAT5/CAT6 Cable
- 3.5mm headphone
VGA Female, S-sub HD 15-Pin x 2
- RJ-45 x
2 for CAT5/CAT6 Cable
headphone stereo jack x 2
Vertical Frequency Range
VGA Resolution Support
- 1280X720, 1280X768, 1280X960, 1280X1024
- 1600X900, 1600X1200
- 1920X1080, 1920X1200
- VGA balun transmitter main unit.
- VGA balun receiver unit x 2 for remote
- Power adapter x 3
- User manual