Click to enlargeCGA RGB DB9 Pin To HD 15-Pin VGA Adapter Cable

CGA DB9 to HD15 Pin VGA Adapter CableCGA RGB DB9 To HD15 VGA Adapter Cable
This is the specially made adapter cable intended to be used for connecting a 15Khz RGB signal to our RGB converter AV-1 model with standard VGA output to LCD flat panel display. 

We suggest you to order the proprietary adapter cable from us to avoid the the connection problem or you may customize one yourself  with our specification because the typical legacy DB9 to HD15 monitor adapters provided from other vendors these days have different pin-out assignments than ours and they shall be used for connecting with IBM PS2 or NEC Multi-Sync monitors only.  If you pick up one of those monitor adapters for input to our converter, the converter will not process your RGB signals correctly.

Or you may customize your own input adapter cable for your RGB device with DB 9-pin output. The following diagram shows the corresponding pin-out assignment from a DB9 RGB output to the 15-pin D-sub input of our model AV-1 converter.

This adapter cable is intended to bring the 9-Pin output from the RGB device to the 15-pin input connector of our RGB converter. Our RGB converter will double the horizontal sync frequency from 15Khz @ 50/60Hz to the standard 31Khz @ 60Hz for LCD VGA display. If you just bought this adapter cable to connect between your RGB device and a VGA monitor without going through our RGB converter (model: AV-1), the sync frequency will not be adjusted and result in no display on LCD display !

 




CGA RGB DB9 Pin To HD 15-Pin VGA Adapter Cable
CGA-VGACable$10.50