HDMI Video Balun Over CAT5 CAT6 Extender Kit
For
typical HDMI / DVI cables over 30 ft long, they are harder to find unless
customized and very expensive to get. In real world HDMI
cables are difficult to be altered after it is produced because the HDMI
connector can only be soldered or terminated by professional worker in
factory, end users cannot reduce or increase the length of the HDMI cables
with ease.
On
the other hand, network Cat 5e and Cat 6 cables are readily available everywhere
and inexpensive and is very user friendly for both end users and professional AV
installers.
This HDMI/DVI balun
over Cat6/Cat6 extender uses two pieces of CAT-5e or CAT-6 cables to extend the HDTV display up
to up to 200
ft (60 meters) for 1080p content. It not only breaks the limitation of the
HDMI cable transmission length, but also offers more flexibility and convenience
in cable construction by using the Ethernet cable instead.
Extend the reach of your
HDMI DVI connections effortlessly and enjoy the digital video/audio
wherever you want it with same HD quality as the original input from the source. No signal loss
guaranteed and maintain the same sharp and crisp clear images running through twisted-pair
CAT-5/CAT6 cables.
Ideal for home appliances to enhance home entertainment center and
extends HDMI or DVI devices throughout home, computer labs, showrooms, boardrooms,
training center, tradeshows and window displays and other commercial
setups.
Easy
Installation Done In Minutes
This HDMI digital video balun consists of one HDMI transmitter and
one HDMI receiver. No settings or configuration needed for setup. Simply connect HDMI
output from the source device to the transmitter unit and run 2 network cables from
the transmitter to the receiver unit and then connect the receiver unit to the
TV via HDMI link. That's all it takes for the installation. Users can
instantly enjoy the crystal clear high definition video and digital audio wherever you want it with same HD quality
as the original input. No signal loss guaranteed.
Low-Cost
Long Distance Digital Signal Transmission With Ease
By using this HDMI balun for digital video extender kit, users can easily customize the Ethernet length as needed to
transmit the HDMI signals at much lower cost compared with using the typical HDMI cables of the
same length.
In addition,
CAT-5e and CAT-6 Ethernet cables are easy to hide in a house and behind walls for
ultimate flexibility and eliminates logistics problems of having custom length
HDMI cables made. Pro choice especially for field installation.
Active
Equalizer And Amplifier Circuitry
Built-In
Both the
transmitter and receiver units have equalizer and amplifier circuitry built in
to ensure error free signal transmission for the ultimate HD experience.
With
this extension device you can easily extend the HDMI signal for up to 200 ft (60
meters) at 1080p resolution or up to 330 ft (100 meters) at 480p resolution. The
maximum effective transmission range will vary according to the HDMI signal resolution.
Detailed specification as follows:
Backwards
Compatible With DVI Signals
This HDMI balun is backward compatible with all DVI devices and displays too. This kit will work for DVI signals too in
addition to HDMI ones. Users can simply combine DVI to HDMI adapter cables to
work this HDMI extender kit for sending:
External
Power Supply
This HDMI-Over-Ethernet solution utilizes dedicated power supply to
ensure reliability and minimizes loading on your HD sources.
- Twisted pair
network cabling provides added protection against outside interference
and increases overall signal transmission distances.
- Low-cost solution by using the inexpensive CAT-5E/ CAT-6 network
cable to replace the HDMI cable for longer distance transmission with no signal loss.
Perfect for any
HDTV display, projector or digital signage applications.
- Supports HD devices at
480p, 720p, 1080i and 1080p resolution.
- Transmission distance can be
up to 200 ft for 1080p using CAT-6 cable.
- Supports video amplifier bandwidth of
165Mhz/1.65 Gpbs per channel(4.95 Gbps all channel).
- Supports 8-bit per channel (24 bit all
channels) deep color.
- Support uncompressed
LPCM audio and compressed audio such as DTS, Dolby Digital, DTS-HD and Dolby
True HD.
- Active drive and compensation for
error-free transmission. No configuration required.
- Auto-adjustment of feedback, equalization and
amplification.
- Fully compliant
with HDMI 1.2a with HDCP full compliance.
- Backwards
compatible with DVI signals.
Input Support
Input Video
Signal..............................................................0.5 -1.0
volts p-p
Input DDC
Signal.................................................................5 volts
p-p (TTL)
Output Resolution Support
Output Video
Signal.......................................................................HDMI
1.2a
DTV/HDTV..........................................1080P/1080i/720P/576P/480P/576i/480i
CAT-6
cable..............................................................................60M
for 1080p
CAT-6
cable..............................................................................100M
for 480p
Interlaced(50&60Hz)................................................................480i,576i,1080i
Progressive(50&60Hz)...................................................480p,576p,720p,1080p
Environmental
Operating
Temperature......................................................................0
to +70
Operating Humidity....................................10% to 85 % RH (no
condensation)
Storage
Temperature......................................................................-10
to +80
Storage Humidity..........................................5% to 95 % RH (no
condensation)
Power Requirement
External Power
Supply..................................................................5V DC@2A
Power
Consumption..................................................................5Watts
(max.)
AC Power
Adapter.......................................................................US
standard
- HDMI balun transmitter unit x 1
- HDMI balun receiver unit x 1
- User manual
- Power supply(110-240V AC In/ 5V DC 2A out)
