4-Port Remote Power Switch - Phone Control + Web Control
This premium network-controlled power switch provides remote/central management of AC power distribution through LAN, WAN/Internet or telephone.
It is designed for power tasks such as distant power reboot, equipment power on/off control, web/network
administration, power event scheduling, power event alerts.
Other benefits from employing this intelligent
power distribution system including:
- reduction of server/data center downtime and
labor costs with remote power control.
- remote power source management and power
reboot of crashed systems
- network equipment monitoring and power
rebooting through auto-ping setup
- real-time power consumption monitoring
- setup of power event alert message sent
through emails, SMS text messages or SNMP trap notification
- avoids power surges and UPS overloads by
controlling power-on and power-off sequences.
- auto-reboot the failed network devices.
Administrators can control network devices or
power equipments from any locations within local network or internet and saves
trips of technical personnel. Eliminate service calls, system blackout down time and increase reliability.
Control of Power Ports
Each AC power outlet can be independently powered on, off or power cycle for an immediate reboot, time-delayed reboot and power event scheduling.
Users can have complete control of when and how powered equipments are restored restored with a time delay or scheduled
for On/Off shutdowns to conserve energy in the data center.
Designed for high voltage resistance and
protection for leakage of electrical currency with 15 Amp total max current output.
Power Control By Web + Phone Keypad + RS232 Console
One major advantage of this remote power is its telephone control function. When networks lock up or no internet connection, users can still control the
power switch using the phone keypad to command the connected power devices. Administrators can always gain access to their
powered devices by calling into this remote power switch from anywhere in the world.
Other than the Ethernet and PSTN phone line connection, this power controller also offer RS232 console port for
using the HyperTerminal protocols to control control power on/off/reboot.
Remote Control Mode
- Web control through intuitive web browser
- Telephone control through phone keypads with
- Master power on/off button allows manual override from the local site.
- Console Control - the built-in RS232 console port can be connected to a local terminal for controlling the switch
when network connection not available.
Switch On/Off Powered Device Via Phone
This intelligent power controller is also a telephone-controlled remote AC
power switch. Anyone from anywhere in the world can call into this power
controller for operation and work through using telephone key pad.
When the network service is down or not available, this smart power controller can still
turn power on/off or reboot the connected powered equipments by calling into the
power switch for full operation.
Administrator can assign security pass codes to
any authorized personnel to have phone control over the the power switch.
This power switch will pick up the phone after a pre-defined number of rings. Entering the pass code on the phone through the
keypad after being prompted, users can perform the following 4 tasks:
- Controls the 4 power outlets' operation
(ON/OFF or reboot) by pressing "1" from the phone keypad.
- Reports the total electrical current load by
pressing "2" from keypad.
- Reports the temperature by press
"3" from the keypad.
- Reports the current IP address of the
remote power switch by
press "4" from the phone keypad.
Each command entry by phone
will be confirmed with machine voice to echo back the user's selection and the
current outlet power status after entry made.
Detailed Web-Based Control Operation
Its intuitive web control panel provides various
important power control functions including remote power scheduling, remote power
setting and remote power status report, which can all be accessed via internet
or local network:
- Advanced Power Operation Scheduling
This unit can perform power operation at any specific moment or on daily, weekly, monthly or yearly
basis. For instance,
users can program the connected power device to be turned on/off or rebooted
performed daily at 11:00 AM, weekly on every Sunday
at 7:00PM or yearly with specific month, day and time programmed in advanced.
- Arrange Power-Up Or Shutdown Sequence
With Timed Delay
Supports power cycling sequence with priority so each power outlet can be turned on/off
or rebooted with timed delay in seconds or minutes to prevent all power devices from starting up simultaneously to cause sudden
overloading or dropped loads.
- Auto Ping For Automatic Reboot Of Crashed
The auto-ping function will automatically check the monitored network device's IP
address periodically or any public domain address such as
Once the network equipment failing to respond
the ping request over the user-defined event counts and preset time period, the
programmed power action will be executed, which can be a timed reboot and alert
- Secure User Access Control
This intelligent power switch supports multiple users access with password security. Manager can assign permissions for each user to access all or only the
power outlets assigned.
- IP/Mac Filter Protection
This unit also supports
firewall function by providing both IP and MAC address filters to prevent
unauthorized user from gaining access to the switch and devices connected
through the network.
Control Panel Screenshots
Monitoring Power Load And Device Temperature
As data servers added to the setup, power requirements and heat output are also on the rise. This remote power management
unit allows remote monitoring of total amperage draw on power devices connected and the surrounding
Both the temperature sensor and AC (RMS)
electrical current meter are built into this power manager unit so
no external sensor probes required. Its intelligent load current meter and temperature monitoring function helps administrators greatly to keep track of
total electric current reading from power outlets and device temperature in order to prevent system overload in advance with better power management.
This power solution is SNMP-based so that alerts can be sent automatically by email
or SMS text, if SMS server is deployed, to manager when amperage or temperature levels exceed established thresholds.
Multiple Safety Self-Protection
This intelligent power switch provides 3 different system shutdowns for safety measure:
System Shutdown By Current Overload:
this remote power switch will be automatically shut down
by its internal circuit breaker for responding to a current overload or short circuit condition.
System Shutdown By Temperature:
ths remote power switch has a temperature sensor built in for detecting the surrounding environment temperature.When the temperature reaches the preset value and lasts for preset time interval, the power switch will be shut down
automatically. Also this power switch can be automatically turned back on
again after it cools down to preset temperature point.
By Manual Push Button:
A master power on/off button on the switch box itself for local operator
to override the remote control mode and take control of this power switch in
Power Event Alert Notification
Warning alerts can be programmed to be sent out right after critical power
conditions occur so manager can take preventive measures if needed.
The alert message can be generated automatically
via emails, SMS text messages or SNMP trap notification according to the pre-set
Alerts will be sent in response to the following
- Ping failure on the network devices
- Device temperature rising above the preset
- Electrical short circuit and current overload
The event log can be viewed directly or archived by downloading from the web page in .csv file format and saved into the hard drive.
Support API Functions
This remote power switch also provide API function for engineers to develop customized power management applications and build integration with other programs for monitoring power status and performing desired power operations.
1U Rack Mount Ready
This 2-port remote power switch is 1U rack mount ready. The rack mounting ears are sold separately. User can easily mount this equipment on a standard
19" rack by purchasing the optional rack mounting ears from us.
Equipment Protection / Energy Savings
Protect sensitive devices or valuable equipment by keeping them powered off when not in
use. Great for energy related or network application by powering down equipments
when not needed for power savings and to save on wear and tear or powering up
- Professional IP-addressable power distribution unit with built-in web server with 4 AC outlets.
Remote management of AC power distribution through LAN, WAN/Internet, RS232 console
port or telephone.
All power outlets can be independently controlled locally and remotely.
AC outlets from the power switch can be turned on/off, power cycled for
a immediate reboot or reboot with timed delay, power cycle sequence with assigned priority and power event scheduling.
- Complete power control via web, network, telephone, PC
RS232 terminal or On/Off button on front panel.
Real-time monitoring of
amperage draw and site temperature through the internal sensor and current meter.
Manual power on/off button to override the existing power status and gain immediate control from local access.
LED displays for power status, total current and
control mode indication.
Power-up sequence with priority so connected equipments
can be started up in proper sequence and prevent sudden overloading.
Easy web scheduling
for power operations performed on specific outlet daily, weekly, monthly and yearly.
Supports API functions, HTTP and RS232 commands for engineer to develop customized power management applications and build integration with other programs.
Supports Wake- On-LAN
protocol for remotely starting up computers.
shutdown help terminate running applications before powering off the computers or data servers.
function for detecting any failed network equipment and performing
timely reboot or other power controls.
IP filter/mask function with access management helps prevent unauthorized
Early warning alert sent by email, SMS text message or SNMP
Trap to notify authorized personnel.
15-AMP circuit breaker protection to avoid power overload and protect connected devices.
1U rack mount ready. The 19" rack
mounting ears are optional and purchased separately.
Designed for high voltage resistance and protection for leakage of electrical currency.
Remote power reboot of any device like:
- Network Routers, Cable/DSL
Center, Servers or DSU/CSU,
- Kiosks,ATM Machines
- Alert Systems/Security
- Lighting Equipments/Lamps
- Industrial Machinery
- Power Sequencing:
Control the sequence by which your power outlets and attached devices activate, helping prevent circuit overload, and
ensuring that attached devices power-up in an appropriate sequence.
- Protection- Protect sensitive devices by keeping them powered off when not in use. This prevents
hackers from seeing them at all times.
- Saving Energy-
Power down equipment when not needed for power savings and to save on wear
- Security Notification-
Power up alert devices like sirens, lamps, speakers.
- Intelligent Power Management-
Power up environmental system like heaters, coolers, pumps, etc. with
Interface: Ethernet RJ45
port x 1
port x 1
Outlet Plug: Universal Style AC
outlet x 4
Interface: RS-232 serial
port x 1
Protection: 15 Amp circuit
Status: 4 Green LEDs for
Mode: 1 Green LED
for LAN mode and 1 Orange LED for phone control mode
Meter: 2-digit LED
display panel for showing the current amp reading
- Supports TCP/IP, UDP, SNMP, DDNS, SNTP,
HTTP, HTTPS protocols.
- Web server design with control through
- Supports fixed and dynamic IP address.
- Supports NTP (Network Time Protocol ) -
synchronize the time of the power controller to the Internet web time
- Supports DHCP and alternate ports for
- Security password identification to
ensure system stability.
Voltage Support Range: 85V to 264V AC
Frequency Range: 47-63Hz
Rated Current Output:
- 15.0 Amp max total for all 4 outlets
- 10.0 Amp max per each power outlet
Temperature: 32-140 degree
- Dimension: 332
x 153 x 44 mm (W x D x H)
- Power Consumption: 7W
Remote power switch unit.
AC power cord x 1.
Manual/Utility CD disk
the 1U rack mounting ears for this model ? Please click here to order it !
the variety of power splitter and adapter cords ? Click here
the power outlet saver cord ? Click here
here to purchase the
optional Ethernet To Wi-Fi module for converting this device into a