8-Port Metered Power Strip With Current Meter And Alarm Buzzer
intelligent metered power strip is a very helpful power control device for IT
engineers to use when arranging the power supplies for equipments. As new equipment units
are added to the rack in the cabinet or factory, users can immediately observe
the impact on the cumulative
current draw so engineer can safely load each circuit properly without taking
the risk of overloading the power
circuits so to avoid the possible power disaster.
This metered PDU slave unit has a total
of 8 NEMA 5-15/20R
output receptacles with 15 ft. AC power cord and 15 amp circuit breaker in
rugged metal case design.
Also featured with real-time
monitoring of the power loads from power devices connected through its digital
LED meter and supports max 15 amp/110-230 volt capacity in a versatile
multi-mount housing, allowing users to
distribute power throughout a rack or cabinet.
LED Meter Display For Monitoring Electric Power Consumption
Its built-in digital LED panel displays total power
current reading for all the powered
devices connected to this PDU unit, great for engineers to safely
load each circuit to its maximum allowable load capacity without the danger of
overloading the power circuit.
Also very beneficial for data center use for helping
the system administrator monitor the total
power consumption information from its current meter reading and able to timely re-arrange
all the connected powered equipments to ensure sufficient power distribution for their blade servers.
Users can set up the warning
point by using the using the function button on the front panel of this smart
metered power strip device to alert the administrator when
the total power consumption exceeds this pre-set value.
When the meter reading
exceeds the preset trigger point value, the PDU's alarm light will constantly
illuminate and the alarm buzzer will go off at the same time.
Built-In Alarm Light And Buzzer For Warning Of
Its user-defined programmable overload
trigger/alarm function benefits the IT administrator for preventing a
potential circuit overload and critical system failure from happening and saving
light will keep flashing and the buzzer will go off when the total power
consumption has ever exceeded the preset value. Administrator can always find out the
peak value that had triggered
the alarm by simply pressing the Function key from the power strip itself.
Remote Control Of Metered PDU Through Web
This smart power strip can work by itself for local monitoring of the AC power distribution or co-operate with
the optional PDU server unit.
The optional PDU
server unit offers instant power monitoring via network, LCD panel to
display power consumption, circuit breaker to avoid overload damage, E-mail and
SNMP Trap to send warning message to manager.
The optional PDU server unit helps administrator
with tasks like:
- taking control in monitoring power consumption
status of each smart power strip connected to it.
- keeping track of the
site temperature and humidity of the
- sending out alert emails and SNMP trap info to
authorized personnel for warning of abnormal power events and taking
preventative procedures to stop the overload and unusual power surge in time
through the Internet instead of sending IT
personnel on site for inspection.
- detecting the movement of rack door to prevent
someone open the door to do unauthorized operation.
1U Rack-Mountable Design
Detachable rack mount ears are configurable for wall mount, under-counter and
rack mount installation. Uses only 1U of rack space when installed in any
19-inch rack, with the potential for zero U mounting in the cable management
area of most rack enclosures.
- Intelligent AC power strip with 1U rack mount
- Digital RMS electric current meter built in
with digitized panel display.
- Built in with digital current meter for
displaying the local power consumption of connected equipment.
- Alarm light will keep flashing when the total
power consumption has ever exceeded the preset value.
- Ideal for horizontal or vertical style power distribution in
office, workbench, industrial, network, and telecom applications.
- 2-stage audible alarm buzz for system warning
and power overload events.
- Supports programmable overload trigger setup
with alarm buzzer function to provide local and remote warning for the administrator
to take preventative measures.
- Supports real-time remote monitoring of power
status per each outlet through the network or internet without sending IT
staff to the site when metered power strips are linked with the optional PDU
- Sturdy all-metal aluminum housing stands up to demanding
network, laboratory or other industrial environments.
- Built-in 15-Amp circuit breaker can avoid
damage caused by power overload events.
- Provides optional link with PDU server unit
for remote power monitoring via LAN and WAN network.
- 15 amp output per port with 115/230V 50/60Hz
for input and output capacity.
- 15-ft long power cord.
|| 85V~264V ( 47~63Hz )
|| 15 Amp per port or 20 Amp total
|| NEMA 5-15/20R receptacle x
|| NEMA 5-15/20R receptacle x
|| RJ11 port ready for
connecting with optional PDU server unit
|| 2-stage buzz for system warning
and power overload
|| 0 - 60 degree C
|| 19" 1U standard frame
|| 445 x 40 x 40mm (W x D x