15Khz RGB CGA/Component YCbCr to VGA Converter Scaler
This CGA RGB to VGA converter scaler unit can up convert the legacy CGA type RGB
videos with 15Khz horizontal or 480i 576i component video to selectable VGA
output resolutions for display on VGA LCD
monitor, projector or LCD TV.
Great replacement display solution for those older CGA type RGB equipments or
video devices with 480i 576i component video YCbCr outputs.
If users want to use the modern LCD flat panel display for their legacy RGB source, this converter provides the right solution. Glitch-free conversion with high resolution output display of sharp frames and fine pixels.
It digitizes the incoming interlaced analog video signals and up converts them to progressive scan VGA or RGBHV format with perfect image output quality.
![]() |
15Khz CGA
RGB To VGA Converter
All the legacy CGA type RGB devices can be up converted nicely at selectab1366x768,
1024x768 or 640x480 pixels for displaying on VGA monitor, projector or LCD TV via VGA connection.
The specific analog CGA type RGB video inputs accepted by this converter including those RGsB, RGBS, RGBH/V and RGBH+V type with horizontal frequency 15.73 or 15.62 KHz and vertical at 60 or 50 Hz.
CGA signals with TTL level are not supported by this RGB video converter.
Those arcade game boards or older gaming computers such as Amiga that can output in such CGA specification as mentioned above can now be converted to selectable VGA pixels and displayed on LCD VGA monitor.
![]() |
Component
YCbCr Video
To VGA Converter
This CGA RGB to VGA scaler converter also supports non-HD type component YCbCr video
at 480i or 576i type signals from sources
such as DVD players, satellite receiver, digital media players and so on.
[Note]:
480p, 576p progressive scan or HD type 720p/1080p type component video feeds are
not supported by this converter.
The component video input adapter cable is included in the package.
![]() |
Legacy Game To
VGA
Converter
Major legacy game consoles with 480i/576i component YCbCr video outputs
or YUV type RGB outputs can also be up converted into progressive scan VGA/RGBHV type and scaled up to 1024x768 pixels or 1366x768 pixels.
![]() |
Easy Switching For Video Input
Type And Output Resolution
This video scaler is able to support both CGA video input and YCbCr
component RGB video input.
Users can use the push button on the top of the converter to choose between CGA RGB input or YCbCr component video input.
Its video input LED will confirm user's video input selection through red or green LED.
Video output resolution is selectable through the dip switch located on the 15-pin VGA connector.
![]() |
![]() |
Flexible DB 15-Pin VGA Connector
For Both CGA And Component Video Input
This converter uses 15-pin VGA connector
for both CGA input and component video input. The component video input adapter cable is
included in the package.
However for those 15Khz RGB devices with DB 9-pin outputs, we suggest you to purchase our proprietary DB 9-pin CGA to 15-pin VGA input adapter cable to avoid problem or you may prepare the input cable based upon the spec provided below.
The following diagram shows the corresponding pin-out assignment for our 9-pin to 15-pin adapter cable.
![]() |
Supports 4:3 And 16:9 Wide Screen VESA/VGA Displays
This RGB to VGA converter is featured as the only product in the market that supports true 16:9 output with native wide screen resolution
at 1366x768 pixels for wide-screen type LCD TV or LCD/TFT monitor or 1024x768 pixels output for standard 4:3 CRT monitor
displays.
Advanced 3D Motion
Adaptive De-interlacing
With the motion adaptive de-interlacing technology, this unit easily converts the interlaced RGB signals into progressive ones (scanned every line).
This unit also adopts automatic 3:2/2:2 file mode detection and non-linear scaling to enhance the picture quality for sharp and clear output.