IR Sensor Wire + IR Blaster/Emitter Kit For Smart TV IR Repeater A/V Extender
This IR remote sensor/emitter cable kit is a replacement component for use with
IR extender kit or A/V extenders that support IR remote extension.
The IR sensor cable could be plugged into an IR
repeater/extender or A/V extender and serves as the external IR sensor for receiving the
command signal emitted from an remote controller.
It could also be plugged into a video equipment that can support IR
plug-in such as cable box, satellite
receiver, home theater system and serves as an extended IR probe for receiving the input of IR remote control
[Note]: Not all audio/video equipments or extender
kits offer such IR plug-in. Please check your video equipment first before purchase.
Its paired IR blaster/emitter wire is
designed for blasting the IR remote command toward the A/V equipment to be controlled
so the audio/video source equipment
at distance can perform the commanded tasks such as play, pause, power on/off, volume up/down, channel +-, record and so on.
Each standard package includes 1 of IR remote sensor wire and 1 of IR remote blaster/emitter wires. Each wire has the same length of 6.5 feet.
Easy Wire Extension
Both the IR blaster/emitter wires and the IR sensor wire all use the standard 3.5mm headphone plug. If you wish to extend these wires for
longer cable length in the setup, you can simply use longer 3.5mm or 2.5mm audio
extension cables to join with these IR input/output wires for cable extension if needed.
IR Remote Sensor Wire
The IR remote sensor wire is used for receiving the control commands emitted from IR remote controller.
It could be plugged into a video
source device that can support IR plug-in or video/audio extender and serves as the IR sensor
probe for receiving the input of IR remote control
IR Remote Blaster/Emitter Wire
The IR blaster/emitter wire is used for blasting the IR remote control signal toward the A/V equipment to be controlled
to perform the desired tasks.
- 6.5-feet long IR remote sensor wire x 1
- 6.5-feet long IR remote blaster/emitter wire x 1