2x2 HDMI Video Wall Controller Scaler System - Rackmount Ready
This stand alone 2x2 HDMI video wall processor outputs a single HDMI source image to 4 TV panel displays in a 2 by 2 Video Wall configuration for large-screen presentation.
It provides high-quality image scaling, easy operation controls and adjustable bezel compensation, which are all essential for the video wall system to perform smoothly as envisioned.
This video wall system is a cost-effective screen controller solution for multiple LCD screens stacked up together and creating one supers-size screen for display.
Your image screen is limitless as your imagination goes. See your multimedia content displayed bold, bright, and big for advertising, entertainment and information display.
Users can combine 2 or 4 flat panel LCD TVs into one larger display for a 2x1, 1x2 or 2x2 screen through the help of this HDMI video wall controller module.
This device is also fully scalable and expandable at any time as needed. Multiple of these units can work together and outputs to additional TV panels for forming a large-scale video wall setup.
The maximum number of the TV wall systems to be combined to work together is 12 units, which can control maximum of 36 TV panels for a 6 by 6 video wall setup. And there will be total of 26 TV wall configuration modes available for choice.
Adjustments and control of all video-wall functions can be performed through using the supplied TV wall software or RS232, Telnet commands when linked with a router or local network.It also supports pass-through of all HDMI audio formats including LPCM 2CH/5.1CH/7.1CH, Dolby Digital, DTS, Dolby Digital Plus, Dolby TruHD and DTS-HD Master Audio with maximum 192 kHz sampling rate.
Built with high quality industrial grade components for demanding 24x7 operating applications, ideal for advertising, entertainment, digital signage or information display.
![]() |
![]() |
![]() |
Easy 2x2 Setup With Fast Operation
This 2x2 video wall processor is almost ready to use right out of the box after hookup of the HDMI cables between the video wall module and TV displays.
To control this 2x2 TV wall module, you can connect a PC with the TV wall controller using RJ45 cable or RS232 for direct link or through a network router.
The standard package includes a TV wall software to be installed on a PC for direct control of single video wall controller for 2x2 setup or control multiple video wall units together through local network/router.
Once the setup is ready, users can have complete control of the system and see single HDMI input source to be distributed and spanned across multiple TV panels or monitors shown as a single image in real time.
Detailed display control can be made for individual monitors or all TV monitors together in order for video to be displayed in proportion with more diversified arrangement.
![]() |
![]() |
Expandable Operation
This 2x2 HDMI TV wall module can be used as standalone unit or further expanded with more of these modules connected to network router for building up large-scale TV wall for presentation and use more TV panels for larger images. Installers can expand customer's current setup at any stage with this unit added and integrated with others.
Multiple video wall processors can be linked/cascaded together using RJ45 network cable through network router to expand the image across more displays as needed.
When multiple video wall modules work together, the 4th HDMI output of each video wall controller shall be routed/connected to the HDMI input of the next video wall module.
For more details please refers to the diagram provided.
![]() |
The maximum number of the TV wall systems to be combined to work together is 12 units, which can control maximum of 36 TV panels for a 6 by 6 video wall setup.
And there will be total of 26 TV wall configuration modes available for choice. The 26 supported wall configuration include:
So if users need to build up a 3x2 video wall, they just need 2 video wall modules, 6 TV panels and a network router for the setup. And there are layouts of 1x2, 1x3, 1x4, 2x1, 2x2, 2x3, 3x1, 3x2, 4x1 to be selected and presented. For more details please refers to the diagram provided on the right.
For a 3x3 setup, users can use total of 3 video will modules, 9 TV panels plus a network router for the setup. And there are choices of 1x2, 1x3, 1x4 , 2x1, 2x2, 2x3, 2x4, 3x1, 3x2, 3x3, 4x1, 4x2 formation to be selected and presented.
For a 4x4 setup as illustrated below, users will need to use 5 video wall units, 16 TV panels and one network router for the setup.
Fast Control Through Software Or Telnet
Controlling the video wall unit through the supplied TV wall software is most recommended
and offer complete
control of the setup and central management of single or multiple video wall units via direct Ethernet connection
with a PC or local IP connection through a router or LAN.
Once connected, all the settings about the TV wall formation, image/resolution control, screen adjustment, bezel correction are just a few mouse clicks away.
For advanced users, detailed Telnet commands are also provided for them to develop the custom control application for private use or distant control.
[Note]: Telnet control feature is only good for control of single video wall unit.
For control of multiple units, users must use the supplied TV wall software and
control through router or local network.
TV Wall Software For Configuration Control |
![]() |
H/V Compensation - Bezel Adjustment |
![]() |
TV Wall Software For Output Screen Positing Control |
![]() |
List Of User Favorite Custom Settings |
![]() |
Detailed Image Control And Adjustment
Image display adjustments are provided available for smoothing out your video wall setup with more controls.
Video input signals are processed and scaled to bring out the highest possible image quality for all flat
panel displays.
Video Output Screen Resolution Control |
![]() |
Screen Image Adjustment Control |
![]() |
Adjustable Bezel Correction
This TV wall controller provides users with adjustable bezel correction, which allows the video wall image to be adjusted
so the audience can view a fully aligned image across multiple TV displays with optimum visual experience.
This adjustable bezel correction feature offers uses with great flexibility for the choices of flat TV panels used by accommodating for the gap between the TV monitors' bezels.
User can activate Bezel Correction option from the TV software on single or all video wall units. Users can easily control and configure each TV panel screen to align the position and space between physical monitors caused by the bezels of displays and achieve satisfactory results.
![]() |
Full Wall Mode And Clone Mode
The actual video source screen will be split directly over the display array. This 2x2 video wall system can be manually configured for 2 output modes:
![]() |
Advanced HDMI DVI Scaler
This HDMI video wall unit provides users
with a variety of HD output resolutions in order to deliver the best picture
quality. It can support a very wide range of HDMI and DVI input
and output resolutions and able to upscale HDMI input sources up to 1080p
and all other HD and RGBHV output resolutions as follows:
Video Input Resolution Support | Video Output Resolution Support |
|
|
Last Memory
This 2x2 video wall processor will memorize users' current setting in the system buffer once configured or adjusted. The current screen mode will be displayed right away in the same matrix style after power cycling or power outage. No re-configuration again after the power off.
5 Favorite Custom Settings
This 2x2 HDMI video wall module allows users to save up to 5 favorite custom settings in the system memory after all adjustments and configuration are complete.
So user can call up any of the saved setting without going through the adjustment next time.
1U Rack-Mount Ready
This unique 2x2 video wall system is 1U rack mount ready. The rack mounting kit is included as part of the accessory pack. User can easily mount single or multiple video wall systems on a standard 19" 1U rack.