2-Channel TVI CVI AHD RCA Cameras/Video Extender Over Coax Cable

2-Channel TVI CVI AHD RCA Cameras/Video Extender Over Coax Cable
2-Channel TVI CVI AHD RCA Cameras/Video Extender Over Coax Cable
Item# RF-EXT101
$68.00

2-Channel TVI CVI AHD RCA Cameras/Videos Extender Kit Over Coax Cable
If you or your customer wants to add more cameras to an existing CCTV or video setup completed long time ago, the difficulty is more than the beginning.

This 2-channel video multiplexer extender kit can help users save money, labor time and maintain the camera or video system with ease by  adding extra cameras or video feeds over the existing coax cable.

Users do not need to run any new cable. Using the original cable to transmit both existing old camera and new camera and job is done fast.

The multiplexer kit works in pairs with one transmitter and one receiver and it fully supports HD TVI, CVI, AHD type 1080p cameras, analog video cameras and composite video too.

The transmitter combines the existing camera or video signal with the new video signal into one and sends them over single coax cable in real time.

Then the receiver reconstructs the combined camera or video signal back to individual video signals at the remote end.

You may use this kit for 2 applications as below:

  • Sending 2 of any HD TVI, CVI, AHD type 720p/1080p camera or analog BNC RCA camera signals over 1 coax cable at the same time.
  • Adding 1 new HD TVI CVI AHD type camera or analog BNC RCA camera signals over existing coax cable 

Easy And Low-Cost Solution For Adding New Video/Camera
This camera video extender kit makes installer or end users easy to add extra cameras to existing CCTV system.

Users can still use the original coax cable to transmit both old camera and new camera at the same time. Save labor time and reduce the cost of buying and installing more cables.

Supports Both HD 1080p And Analog SD Type Cameras
This camera video extender kit supports HD TVI, CVI, AHD type 720p/1080p cameras, analog composite BNC/RCA video cameras and composite video signals too.

Combined Transmission Of Different Camera Types
Users can combine/add different HD type of TVI, CVI, AHD or analog camera feed with existing camera system through this extender kit for transmission. 

For example, this kit can add a 1080p HD type camera along with analog camera feed together through one cable or mix a HD-TVI camera with a HD CVI camera together for the transmission.

Adjustable Video Gain Control
The output video levels are quite different among TVI, AHD, CVI and analog composite video cameras.

The transmitter unit has a video adjustment dial for adjusting the brightness/contrast and signal strength level based upon the transmission distance or the camera type used for optimal video performance.

This feature ensures same sharp and clear video quality to be maintained all the way with full brightness/contrast and minimum distortion just like the original video quality.

Super Long Transmission Range
The maximum transmission distance can be up to 200meters or 650 feet with no interference and no signal loss.

  • This 2-channel video multiplexer provides an easy and low-cost solution for expanding your existing CCTV camera system.
  • Users can save labor time and reduce the cost of buying and installing more cables by add extra cameras or video feeds through using existing cables.
  • Fast and cost-efficient way to maintain the camera or video system with ease
  • Supports all HD TVI, CVI, AHD type 720p/1080p cameras and analog video cameras too.
  • Suitable for 2 applications:
    • Sending 2 of any HD 1080p TVI, CVI, AHD type or analog BNC RCA camera signals over 1 coax cable at the same time
    • Adding 1 new HD TVI CVI AHD type camera or analog BNC RCA camera signals over existing coax cable 
  • Allowing users to send a 1080p HD type camera along with analog camera feed together through one cable or mix a HD-TVI camera with a HD CVI camera together for the transmission.
  • The transmitter unit has a video adjustment dial for adjusting the brightness/contrast and signal strength level based upon the transmission distance or the camera type used for optimal video performance.
  • The manual video adjustment feature ensures same sharp and clear video quality to be retained at the remote site with minimum distortion and noise just like the original camera or video input.
  • Maximum transmission distance up to 200 meters or 650 feet with no interference and no signal loss.

  • HD/SD Video Camera Type Support: TVI, CVI, AHD, NTSC and PAL
  • Transmitter Unit: 2 BNC/Coax video inputs + 1 BNC/Coax video output
  • Receiver Unit: 1 BNC/Coax video input + 2 BNC/Coax video outputs
  • Power LED: red for transmitter, green for receiver
  • Power Consumption: 0.6W for transmitter, 1.6W for receiver
  • Power Requirement: DC9~12V / 70mA
  • Dimension: 78mm(L) x 84mm(W) x 31mm(D)
  • Operating Temperature Range: -10 to 60 degree C

  • Transmitter unit
  • Receiver unit
  • DC power adapter x 2
  • User manual