Professional RF Coax To Composite Video Audio Demodulator TV Tuner
For PAL D/K System
This RF to composite A/V demodulator is a professional grade TV channel converter, designed to work with coax TV signals such as cable
TV or satellite channels, closed circuit TV channels or other RF modulated signals by converting such
RF coax feeds into
standard RCA formats for various applications such as displaying,
recording, or further A/V broadcast and distribution.
This is the exclusive PAL-D/K
version for countries using PAL-D/K standard for aerial/wired TV broadcast and
distribution in Eastern Europe for countries like Czech Repubic, Poland, Rumania
and so on.
This coax cable signal converter provides convenient decoding solution for extracting the video/audio embedded in the
RF signals coming from satellite
set top boxes or CCTV camera/DVR systems.
Its availability offers cost-efficient solution and helps for those coax setups found in public A/V broadcast, MATV, SMATV systems used in campus, classrooms, hotels,
condos, hospitals, sports bars, restaurants or individual residence.
This device supports all the coax type A/V signal inputs from:
- UHF/VHF channel broadcast or
- Satellite receivers or other set top boxes
with TV/RF out ports
- Modulated CCTV surveillance system
- RF modulators used in MATV setup
Easy 1-Minute Setup
No initial configuration setup needed. No TV channel scan needed.100% hardware operation with easy cable setup.
Full-Frequency UHF VHF CATV Channel Decoding
This RF coax demodulator doubles as an external TV tuner for analog TV signals.
It has a full-frequency analog TV tuner and able to decode all standard
UHF/VHF TV, aerial antenna, set top boxes or
TV tuner unit can also decode those RF/TV out from satellite receivers and
free-to-air set top boxes into separate RCA video audio feeds.
Easy Add-On TV Tuner Module
This coax demodulator can be an external TV tuner module for video monitors, projectors, DVR systems or all other video equipments
that do not have RF coax inputs.
Great add-on item for expanding their A/V equipments with a new RF/coax input.
Great TV Channel Audio Extractor
This RF TV tuner demodulator can extract the audio sound embedded from the TV channels to
standard RCA format for further
distribution. For those who got tired of the low-volume TV speakers, this
external TV tuner box gives users the capability to play or record the decoded TV
channel sound through
their favorite amp, receiver, headphone, DVR or home theater system for better sonic
IR Remote Control
This external TV tuner can be fully operated and controlled via remote
controller or push buttons on the front panel.
Video Audio Capturing
The decoded video/audio feed
for the selected TV channel can be fed into DVD recorder,
DVR or other video capture devices.
Add/Delete TV Channels
Users can use the supplied IR remote control to program/remove the unwanted
TV channels from the reception. The deleted channel will be skipped when flipping channel up/down button and can
always be added back if needed.
Video Audio Extension Over Coax Cable
Coaxial cables offer a low-cost solution for long distance signal
transmission line than the typical balun or Cat5 extender.
This RF demodulator can also be combined with our RF modulator so they can be used as a video/audio over coax cable extender kit for many purposes such as CCTV surveillance, multimedia center, etc.
Auto Gain Control
This coax converter is featured with AGC circuitry for auto adjustment on both
video and audio levels. The output quality will be re-calibrated and retained
the picture stability as the original input A/V signal for the remote end
display with minimum distortion and noise-free with full brightness and
Last Channel Memory
This coax demodulator tuner unit will stay tuned to the same last TV channel when the power comes back up after power outage.
1U 2U 3U Rack Mountable
Multiple units can be daisy chained
together on 1U, 2U or 3U 19" rack using the optional rack mounting kits. Rack-mount kits are sold separately.
The 1U rack mount kit can hold 3 units together. The 2U mounting kit can hold up to 6 units together on a rack. The 3U rack mount kit can hold up to 9 and 12 units together on a rack.
- Professional RF coax to RCA video demodulator for
PAL D/K aerial UHF/VHF system.
- Full TV channel frequency support for
CH5 to CH100 (48.25 MHz to 860.75 MHz)
- Great MATV setup solution for all public A/V broadcast, SMATV systems used in campus, classrooms, hotels, hospitals, sports bars, restaurants.
- Easy RF input replacement solution for those TVs with broken coax inputs.
- External TV tuner add-on module for video monitors, projectors or DVR systems without
- Easy operation via IR remote or push buttons on the front panel.
- Provides convenient viewing access for
coax signals coming from set top boxes with RF output, satellite receivers or modulated
- Perfect for existing modulated cameras
and works with quad video processors, multiplexers, and DVR's.
- Record TV channel, satellite TV RF out or
camera channel through video recorder, DVR or other video capture system.
- Excellent RF audio extractor for
routing the TV channel sound through stereo amp, receiver, headphone, Hi-Fi
speaker or home theater system.
- Digital LED screen for TV channel display on
the front panel of the module to show users the TV channel selected.
- Automatic video/audio gain
control for compensating the input signal level variation for optimal
- Users have the option to remove the
unwanted TV channels from the reception for parental control or other
purposes. The deleted channel can be skipped when flipping channel up/down
button and can always be added back if needed.
- Supports last channel
memory after power-off or power outage. This coax video demodulator will
stay tuned to the last TV channel after being powered off manually or power
- Multiple units can be daisy chained together
on 1U, 2U or 3U rack using the optional rack mounting kit. Rack-mount
kits are sold separately.
Digital LED Screen
- TV System Support:
Frequency Range: CH1 to CH100 (48.25 MHz to
- RF Input
-5 to +30 dbmv
1Vp-p +/- 0.2Vp-p (75 Ohm)
0.755Vp-p +/- 0.2Vp-p (600
Connector: PAL F-Type female x 1
Output Connector: RCA-Type x 1
RCA-Type x 2
Operation: By IR remote control or push buttons on the front panel
Manual adjustment knobs on the
0 to 40 degrees C
Supply: AC 220V with DC 12V 300mA, Center Positive
- Coax to composite A/V converter module
- IR remote
- Power adapter
- User manual
1U, 2U and 3U rack mounting kit, please click here
NTSC version used in North America regions, please click here
PAL B/G version, please click here
PAL D/K version, please click here
PAL-I version, please click here
PAL-Australia, please click here