Analog Dual TV Tuner With Picture-In-Picture Support
Analog Dual Cable TV Tuner With 1080p HDMI RCA AV Outputs
This dual TV tuner box allows users
to watch 2 TV channels at the same time on one TV screen or one single channel
at full screen for
entertainment, monitoring, presentation or recording purpose.
This RF coax to HDMI RCA video demodulator is a
professional grade TV tuner and can enhance
analog TV quality to the ultimate digital format up to 1080p or 1920x1080 pixels
with astonishing digital video quality for visual entertainment.
The 2nd TV channel window can be displayed
together with the
main TV channel screen in various and selectable split-screen styles.
Video audio output can be in HDMI or RCA AV
format.
This RF demodulator TV tuner
supports all the coax type A/V signal inputs from:
- cable outlet for analog CATV or MATV system
- RF type TV output from cable box, satellite
receiver, or other set top boxes with TV/RF out ports
- UHF/VHF channel broadcast or closed-circuit
distribution
- Modulated CCTV surveillance system
- Cable radio or cable FM station
- RF modulators
Full-Frequency Demodulator For CATV Satellite
Decoding
This dual-channel TV tuner
has a full-frequency NTSC TV tuner. It can decode
all UHF/VHF TV, CATV channels from RF modulator, cable outlet, cable box, set
top box with RF TV out.
Supports all standard
analog cable TV channels from CH1 to CH139 or aerial VHF/UHF channels from CH2
to CH83.
The coax RF demodulator can also decode those TV2
output from satellite receivers like DirecTV, Dish Network or all other
satellite set top boxes.
Selectable 1080p HDMI Output + RCA AV SD
Output
This dual TV tuner demodulator can convert the RF TV signals to selectable 720p
and 1080p HDMI output or 1280x720 and 1920x1080 pixels through using the
supplied RCA to HDMI scaler adapter in the package.
RCA AV output is the default output from the
tuner itself.
Dual-Channel Frame Synchronizer
2 TV channels will be decoded and displayed simultaneously
on TV screen with smooth and sharp pictures.
A fast TV window swap button is provided for
fast switching between main TV channel screen and PIP screen.
2-Channel Split Screen Display
2 TV channels can be displayed in different screen modes as follows:
- Single-channel full screen
- PIP window screen on upper-left/right or
lower-left/right corner.
- Horizontal-split screen with top/bottom
video windows
- Vertical-split screen with left/right
video windows
- Picture-by-picture or quad screen
Fast Swap Between Main/PIP Channel
Main channel screen and the 2nd TV window can be exchanged instantly by pressing the
swap button on the front or IR remote.
Easy Add-On TV Tuner Module
This RF coax demodulator can be an external TV tuner module for those video monitors with no RF coax inputs.
It is also a great TV tuner
module for projectors, DVR systems or all other video equipments that do not have RF coax
inputs.
RF Demodulator For Private
MATV System Use
This dual TV tuner can also serve as RF coax demodulator for decoding those
RF outputs from cable box, satellite receiver or surveillance DVR.
Customers can also use multiple
RF modulators for converting each individual video outputs from multiplel video
equipments into multiple private TV channels and combine them into one coax
cable run for further distribution between TVs and demodulated by this device.
Last Memory
This TV tuner will memorize users' current
selection
in the system buffer
once adjusted.
The
last-minute PIP screen mode
and TV channels will be displayed right away in the same configuration after power cycling or power outage.
IR Remote Control
This external TV tuner can be fully operated and controlled via remote
controller or push buttons on the front panel.
Add/Delete TV Channels
Users can use the IR remote to program/remove the unwanted
TV channels from the reception. The deleted channel will be skipped when
flipping channel up/down button and can always be added back if needed.
 |
- Premium
dual TV tuner with 720P/1080P HDMI output and RCA AV output.
Watch single TV channel or 2 TV channels at the same time
on one TV.
- Professional RF coax to HDMI RCA video
demodulator for NSTC RF coax signals from cable outlets or cable
boxes/satellite receivers with TV out or modulated surveillance systems.
- Support HD and SD video output resolutions
at 1080p, 720p, 1920x1080 pixels, 1280x720 pixels and 720×480 pixels.
- 2 TV channels can be presented on TV screen
in different split screen modes.
- Fast TV channel swap between main TV
channel and the PIP channel via IR remote or manual push button.Featured with dual-channel frame synchronizer for smooth video
output with sharp and
clear picture quality.
- The current screen mode and TV channel will be memorized after the
power-off.
- Full CATV channel frequency support for
CH2 to CH139 (48.25 to 883.25MHz) for NTSC system.
- Full aerial VHF/UHF channel support for
CH2 to CH83 (471.25 MHz to 885.25 MHz)
- Great MATV setup solution for all public A/V
broadcast, SMATV systems used in campus, classrooms, hotels, hospitals,
sports bars or restaurants.
- Easy RF input replacement solution for those TVs
with broken coax inputs.
- External TV tuner add-on module for
video monitors, projectors or DVR systems without RF inputs.
- Easy operation via IR remote or push
buttons on the front panel.
- Perfect for existing modulated camera channels
and works with quad video processors, multiplexers, and DVR's.
- Supports last channel memory after power-off or power outage. This coax video demodulator will
stay tuned to the last TV channel after being powered off manually or power outage event.
- This RF demodulator can also be combined with RF modulator for use as a video/audio over coax cable extender kit
for many purposes such as CCTV surveillance, multimedia center, etc.

- Channel Display: Digital
LED Screen
- TV System
Support: NTSC
- Channel Frequency Range:
- CATV: CH1 to CH139 (48.25 to 883.25MHz)
- Air UHF/VHF: CH2 to CH83 (471.25 MHz to
885.25 MHz)
- RF Input Level: -5
to +30 dbmv
- HD AV Output: HDMI female x 1
- SD AV Output: RCA female x 3
- Video Output Resolution: 1080p,
720p, 1920x1080 pixels, 1280x720 pixels, 720×480 pixels
- Channel/Volume Operation: By IR remote
control or push buttons on the front panel
- Operating Temperature: 0
to 40 degrees C
- Power Supply: AC
110V-240V with DC 12V 800mA, Center
Positive

- Dual TV tuner unit
- RCA to HDMI scaler
- IR remote and user manual
- Power adapter x 2